×

error range meaning in Chinese

误差范围

Examples

  1. After comparing the detecting result and the actual height of metal parts , it showed that the detecting error was in the nature figuration error range of one welding seam
    经与实验获得的实际金属结构高度数据对比,得到金属结构高度检测的误差在单道焊缝的自然成形的高度误差范围内的结果。
  2. The possible error of solar radiation climatic calculation is analyzed and discussed . the error range of calculating solar radiation with sunshine data is obtained . the homogeneity test is carried out using 70 monthly total solar radiation series over china with potter method
    在通过对总辐射和日照百分率的正态分布检验以及相关性检验的前提下,以日照百分率资料为参考,采用potter法对70个辐射站进行总辐射资料的均一性检验。
  3. Based on the error theory of point measurement are the identifying of the error range set , sketch of the error ellipse , analysis on displacement of the monitoring sites and error detection , providing a fundamental theory infrastructure for dynamic assessment of surface displacement and gray prediction
    根据点位测量的误差理论,确定定误差值域范围,绘出误差椭圆;对各监测点进行位移与误差判别分析,为地表位移动态分析和灰色预测提供理论基础。
  4. Abstract : discusses the physical process of air infiltra tion under wind pressure combined with thermal pressure , accordingly points out an ambiguity of the calculation procedure in the current hvac regulation , obtain s its error range and presents a more reasonable formula for the calculation
    文摘:分析了风压和热压共同作用时空气渗透的物理过程,据以指出了现行暖通规范推荐计算方法中的物理概念问题,计算了规范方法的误差,给出了更为合理的计算方法。
  5. To improve the steady performance of the system , a fuzzy - pid combined controller is applied to the magnetic bearings system : applying fuzzy control in a large error range ; applying classical pid control in a small error range . the simulation results show that this kind of control strategy can make the rotor of the magnetic bearings stabilize in a large range
    本文首先设计了基本模糊控制器,并用matlab进行了仿真研究,为了改善系统的稳态性能,本文提出采用模糊- pid复合控制器,在大偏差范围内采用模糊控制,小偏差范围内采用传统pid控制,并进行了磁悬浮转子起浮特性的仿真,仿真结果表明这种控制策略有利于使磁悬浮转子在大范围内稳定。
More:   Next

Related Words

  1. error queue
  2. error quotient
  3. error rate
  4. error rate analyzer
PC Version

Copyright © 2018 WordTech Co.